EOS/ESD Association, Inc.

Setting the Global Standards for Static Control!

My cart Checkout
Items: 0
member login

WG 5.0 – Device Testing

Working Group Chair:  Terry Welsher, Dangelmayer Associates

Summer 2018 Virtual Meeting

Agenda items for the meeting on June 27, 12:00 – 1:30 PM EDT are:

Pending

 



April 2018 Face-to-Face

Summary of meeting activities:
The working group completed adjudication of TAS comments on ESD WIP5.0-2018. There was a discussion on ESD data terminology concerns and a need for some new test procedure options for consideration by the HBM and CDM joint working groups.

 



Winter 2018 Virtual Meeting
The group adjudicated technical and advisory support committee comments on ESD WIP5.0; a new standard practice for standardizing the format for ESD information on device data sheets.

 


September 2017 Face-to-Face Meeting

Agenda items for the meeting on September 6, 2017, 3:00-5:00 PM MST are:
a. Introductions
b. ESDA Announcements and Policies
c. Review Latest version of ESD Data Sheets Format. I revised version will be sent to the WG by August 31.
d. Walk-On Items


Summer 2017 Virtual Meeting
Summary of meeting activities 
The committee reviewed and made suggested changes to the current work in progress document on device ESD data sheet standard format. A decision was made to submit the document as a standard practice instead of a technical report.

Agenda items for the meeting on July 18, 2017, 12:00 – 1:30 PM ET are:
a.      Continue discussion/revision of Data Sheet work in progress document
b.      Discuss rollout of document
• Close on conversion to Standard Practice
• Move towards Joint Document with JEDEC? [JEDEC is interested in doing this.]
c.      Next issue – “system-level” component data, special date sheet template for surge protection devices (time permitting)
d.      Other Device Testing Issues


April 2017 Face-to-Face Meeting
Summary of meeting activities
The committee held technical discussions on a new technical report related to reporting HBM and CDM results on a data sheet.  A number of significant changes were proposed and agreed to by the working group. The committee also discussed a future technical report related to datasheet guidance as well as the inclusion of system level ESD, HMM, and latch-up.

Agenda items for the meeting on April 28, 2017, 8:00 – 10:00 am MT are:
a.      Review/revise current version of Data Sheet TR
b.      Discuss rollout of document
                           i.          Couple to ESD data initiative in Marketing
                          ii.          Should this be an SP? (compare to WG27 EOS Process document)
                         iii.          Move towards Joint Document with JEDEC
c.      Next issue – “system-level” component data
d.      Other Device Testing Issues


Winter 2017 Virtual Meeting
Summary of meeting activities

The committee reviewed a draft of the new technical report for an ESD data sheet template. A suggestion was made to include static latch-up information; discussion was held and a decision was made that static latch-up is outside the scope of the committee and the suggestion would be referred to the JEDEC 78 committee.

Agenda items for the meeting on Monday, January 30, 12:30 - 2:00 PM ET are:
a.      Brief review of WG5.0
b.      Review latest draft of TR on ESD Information on Data Sheets
c.      Walk-on Items


September 2016 Face-to-Face Meeting
Summary of meeting activities
The working group reviewed the first draft of the “complete” Data Sheet on Handling (HBM/CDM) section in the new technical report. There was good discussion on different viewpoints of how data sheets are used. A discussion on possible “system-relevant” component information was transferred to WG 5.6 - HMM for further exploration.


Summer Virtual Meeting
Summary of meeting activities
An introduction to WG5.0 along with a review of past work / work in progress was presented for those new to the WG and guests. The committee then discussed sections of a document for a data sheet on handling (HBM/CDM); the document is ready for the writing team to begin. JEDEC has expressed interest in this being a joint document. The working group discussed a section on “system-level” information; however, more discussion is still needed. The possibility of a test method for surge protection devices was also discussed.


April 2016 Face-to-Face Meeting
Summary of meeting activities
The committee continued working on a technical report for standardizing ESD information for component data sheets with a focus on handling (HBM and CDM) and systems (IEC, etc.). A discussion was held regarding other organizations where the data sheet template and technical report (TR) could be promoted and socialized once it is published.

Agenda
Friday, April 15, 8-10 AM agenda items:

1. Continue work on Data Sheet Template and TR text
2. FA Lab Handling Update
3. Open Discussion and Walk-On Items
4. Schedule Next Teleconference


Winter 2016 Virtual Meeting
Summary of meeting activities
The committee continued working on a technical report for standardizing ESD information for component data sheets with a focus on how to report CDM data and the inclusion of system level ESD data on datasheets. A brief discussion was held on developing a handling procedure for failure analysis and other device test labs.

 


September 2016 Face-to-Face Meeting